Ham Radio Backup Power Solutions

Ham Radio

What battery is right for ham radio solutions?

– Ham radios are a great way to stay connected, whether you’re out on a hike or in the middle of an emergency.
– But what type of battery should you use to power your radio?
– Deep cycle batteries are designed to be discharged and recharged multiple times, making them a good choice for long-term use.
– If you need a long-lasting solution for extended use, deep cycle batteries are a good option.

Deep Cycle Lithium Battery 12V 10Ah

Size: 5.94″x 2.55″x 3.78″ (151x65x96mm).
Weight: 2lbs 12oz (1.24Kg)
Capacity: 10 ampere hours
The life cycle: Up to 80% capacity for 2,000 cycles in recommended conditions.
Operating temperature: -20’F min, +120’F max optimal operating temps (battery performs well down to -20’F). Avoid charging below 32’F.
Terminal: Standard F2 terminals (6.35mm or 0.25″ wide)
Charge: 10 A max, 14 V max recommended, 15 V max. 
BMS protection: Maintains cell balance, low voltage cutoff, high voltage cutoff, short circuit protection and high temperature protection in the circuit .
Compatible with charging: using a LiFePO4 compatible charger.

Looking for Lithium Battery Makers?

Deep cycle batteries are used in a variety of applications, from golf carts to RV house batteries.
If you’re looking for a quality deep cycle battery manufacturer, there are a few things you’ll want to keep in mind.
First, deep cycle batteries are designed for extended discharge and recharge cycles, so you’ll want to make sure the manufacturer you choose has experience with this type of battery.
Second, deep cycle batteries are typically smaller and lighter than other types of batteries, so you’ll want to make sure the manufacturer can accommodate your size requirements.
Finally, deep cycle batteries typically have a longer lifespan than other types of batteries, so you’ll want to choose a manufacturer with a good reputation for quality and longevity.
That is why we are here.

Ham Radio Battery

Frequently Asked Questions.

Modern ham radios operate at 13.8 volts DC, allowing them to be powered directly off a 12-volt battery without requiring a power supply. This makes wiring your ham radio to a 12V lithium battery relatively simple.

Depending on the size (hand-held or desktop), power can be from a few watts to 1,500 watts. Many new hams are graduates from citizens band (CB) radio. Unlike the 5-watt limit on CB, hams can use quite a bit more power (1,500 watts).

You can actually power your rig from an automobile battery, and there are lots of hams who do this. But if you’re going to get a battery just for your ham station, get at least a lithium deep cycle battery instead of a standard automotive battery.

Numbers

Client Results

Satisfied Customers
0 +
Countries Covered
0 x
contact us

What can we help you?

Get in Touch

Scroll to Top

Contact Us